2-1/2 inch Lift kit for the 2005-2007  Nissan Frontier 4/wd-2/wd 

This kit is manufactured in America by AutoSpring Kits. Patent pending.

Manufactured from heavy duty steel not plastic or aluminum that can break down or corrode!!! We have been manufacturing and installing a similar leveling kit for the new generation Ford F-150 for over 2 years. We have sold over 3200 kits to Ford dealers,service shops,and happy Ford owners throughout the World.  

Due to popular demand we are now manufacturing and offering a complete lift/leveling kit for the 2005-2006 Nissan Frontier 4wd/2wd

NO STRUT DISASSEMBLY REQUIRED AND NO BALL JOINT SEPARATOR IS REQUIRED TO INSTALL OUR KIT  .Other kits require you to completely remove the struts and disassemble them with a coil compressor tool (and it better be a heavy duty one cause the factory coils are stiff). They claim 1.5 hrs (for a suspension mechanic with the right tools on a good day).

Our Steel spacer simply bolts on top of your existing strut. The 1-1/2" thick spacer and 1-1/2" rear lift block gives you a total lift of 2-1/2 inches. The 1-1/2 inch thick spacer will lift the front end @2-1/2 inches due to the control arm angles .  After installing this kit you can easily clear 33" tires......We designed this kit with strength and ease of install in mind. We use the highest quality materials, including: Zinc plated hardware and Nylock nuts. Our front spacers are fabricated from heavy duty 1/4" laser plasma cut U.S. steel and 1/4" thick wall D.O.M tubing. These babies won't break. !!! GUARANTEED FOR LIFE !!!.This kit WILL NOT CHANGE your factory soft ride at all. No special tools required and the kit only takes two and half hours to install!! L@@k! Your coils are STEEL and your struts are also, so why use plastic in between!!  ...  Lifetime Warranty. If you would like any questions answered about installing this kit or it's installation procedures  call us at 1-800-345-0431,Mon -Fri 8:30-5:30 mountain or E-mail us. Our kits comes complete with 2- Lift/Leveling spacers, zinc plated hardware, 2-rear 1-1/2" lift blocks, 4-rear U-bolts and 8 u-bolt high nuts,  easy to follow installation instructions and the spacers comes standard painted in Gloss black polyurethane finish..

If you have been looking at the various Nissan forums , you have probably read about the problem with premature strut failure. This failure is caused by installing a spacer (plastic or aluminum) in between the coil. This pre-loads the strut/coil causing a much stiffer ride but also over-extends the strut shaft causing the strut to leak and fail, and in some severe cases completely separate. NOT GOOD!!!     

Our kit WILL NOT cause the struts to fail because our steel spacers simply bolt on top of the strut, not in-between. NO COIL/STRUT PRELOAD AND THE FACTORY SMOOTH RIDE IS UN-CHANGED. Our lift/leveling kit also works on trucks with the Factory equipped Rancho off-road package. LONGER REAR SHOCKS ARE NOT REQUIRED.

NOTE: After installing this or any other lift/leveling kit you will need to re-align the front end. However, only toe in will need to be corrected. NO SHIMS or additional parts are required.

Click on a thumbnail below to reveal a larger picture:

This product is currently available for instant purchase on eBay!

To go to the auction, CLICK HERE.

Installation Instructions part 1 CLICK HERE (PDF FORMAT)
Installation Instructions part 2 CLICK HERE (PDF FORMAT)