|
|
|
|
2004-2008 FORD F-150 1-1/2 inch REAR Leveling Lift Kit So you lifted the front of your F-150 to level it out and now the rear has sagged! S ure, you can go with a rear add-a-leaf but that stiffens your smooth factory ride!!Now you can get the lift you need without compromising your stock springs. Due to popular demand. Auto Spring Kits now has available a 1-1/2 inch rear lift block/u-bolt kit for the 2004 -2008 F-150 2wd or a 3 inch lift block/u-bolt kit for the 2004-2008 F-150 4wd (the 3 inch lift blocks replace your factory 1-5/8 inch lift blocks)This kit is made from solid U.S. steel, not aluminum which can break down and corrode over time. We have been manufacturing and installing a front leveling kit for the 2004-2007 F-150's for over three years and sold over 4500 kits. We designed this kit with strength and ease of installation in mind. The kit takes approximately 1 hour or less to install and requires no special tools. This kit WILL NOT change your factory soft ride at all. THIS KIT WILL FIT BOTH 4x4 and 2X4 TRUCKS. * No extended length shocks are required * !! BEWARE !! There's a reason Ford, Dodge, Chevrolet and all other truck manufacturers use steel for their factory rear spacer/lift blocks and NOT ALUMINUM. Aluminum will corrode and break down over time when placed against steel leaf springs and steel axle seats. Also, some OTHER kit manufacturers want you to place THEIR spacer/ lift block between your factory spacer/block (4wd trucks) This is called double-stacking blocks and it is NOT a safe practice. Go to some of the owners Forums on the web and ask about double-stacking blocks and see what the response is. The corrosion and double-stacking blocks can allow your axle U-bolts to become loose and your rear axle may shift. NOT GOOD!! The kit is manufactured in America with pride We use the highest quality materials. Our 1-1/2 (2WD) lift blocks are fabricated from heavy duty 1-1/2"x 3 inch solid steel bar (not cheap cast iron or light duty aluminum) and precision drilled for a perfect fit. The 3 inch (4WD) blocks are fabricated from 1/4" boxed steel tube and ends. The U-bolts and hardware are grade 8-150,000 psi yield. *your factory Ford u-bolts are only grade 4.5* These babies are indestructible and carry a full LIFETIME WARRANTY. After installing this rear kit and a front leveling kit you will be able to clear up to a 35" tall tire. Available in GLOSS BLACK POLYURETHANE FINISH. Note: After installing this kit you will not need to re-align the front end. Your factory alignment is not affected. Click on a thumbnail below to reveal a larger picture:
This product is currently available for instant purchase on eBay! To go to our eBay store to purchase this item, CLICK HERE. |
|
Comments or questions
please write autospringcorpATaolDOTcom |
